Tube Tools - Elliott Tool

Quality Tube Tools For An “I Need It Yesterday” World.

GSI is the exclusive manufacture-direct representative for Elliott Tool Technologies in the Gulf Coast Region. Elliott tube tools has made its name in the boiler, chiller and heat exchanger maintenance and fabrication industries by providing high quality American-manufactured tube tools paired with expert service. GSI is proud to partner with this All American business to bring our customers the highest quality tube tools with local service and 24/7 emergency support for your most critical projects.

Elliott tools 2 .jpg
 

Tube Tools for Every Application

Tube Removal Tools

Tube Installation Tools

Tube Plugging, Cleaning & Testing Tools

Elliott tube removal tools.jpg
Elliott Tube installation tools.jpg
elliott tube cleaning plugging and testing .jpg

Everything you need to remove stubborn, old, corroded boiler tubes, chiller tubes and heat exchanger tubes. Explore our wide selection of tube removal tools, all of which are available as rentals and stocked locally.

Our exhaustive selection of pneumatic and electric tube rolling motors and tube expanders gives our customers the most in-depth inventory to assure you get the correct tube installation tools for each job.

Explore our in-depth tube cleaning and testing tools product offerings from Elliott Tool Technologies. Whether you are venting and plugging heat exchanger tubes, cleaning soot-filled boiler tubes or vacuum testing tubes for leaks, we have you covered from start to finish with our huge rental inventory.

 

Tube Removal Tools

Explore our extensive range of tube removal tools for removing tubes from heat exchangers, boilers and chillers.

Elliott Tool Knockout Tools .png

Jumbo Tube Buster

Tube Knockout Hammer and Knockout Tools

Remove stubborn boiler tubes with this rugged knockout hammer and our hardened knockout tool bits. Elliott’s Jumbo Tube Buster is the recommended driving tool for Elliott’s Jumbo Knockout Tools to remove tube stubs in heat exchangers, Firetube boilers, and Watertube boilers.

  • Tube Size: 0.625” to 2.000” (15.9 – 50.8mm) OD

  • Type: Tube Buster

Stub-Tugger.Search-1.jpg

Pine Jenny "Stub Tugger" 

Hydraulic Ram Style Tube Stub Puller

Elliott’s Stub Tugger is a powerful hydraulic tube pulling system for removing tubes from both heat exchangers and boilers.


  • Tube Size: 0.375” to 3.000” (9.5 – 76.2mm) OD

  • Type: Stub Puller

  • Application: Heat exchangers and boilers

  • Pulling Capacity: 30 Ton (27.2Mt)

  • Stroke: 6" (152.4mm)

  • Use with Elliott's long-lasting TT-series tube spears

Elliott Tube Tugger with Spear and Logo .jpg

Tube Tugger 

Semi-Continuous Hydraulic Tube Puller

Elliott’s Tube Tugger is a powerful continuous hydraulic tube pulling system for removing any type of tube material effortlessly from heat exchangers, chillers, and other heat transfer vessels.


  • Tube Size: 0.625” to 1.250” (15.9 – 31.8mm) OD

  • Type: Tube Puller

  • Application: Heat exchangers, chillers, and other heat transfer vessels

  • Pulling Capacity: 30 Ton (27Mt)

  • Stroke: 3" (76.2mm)

  • Use with Elliott's TT Series Tube Spears

 
PTTC-Cutter.Search.jpg

Push-To-Cut Fly Cutters

Tube ID Cutters

Elliott’s PTTC (Push Type Tube Cutter) Series Cutters accommodate heat exchangers and boilers. The adjustable collar allows tubes to be cut or scored just beyond the tube sheet. The cutting blades are specially coated to increase longevity. Use with Elliott's electric or pneumatic drive motors.


  • Tube Size: 0.375” to 2.500” (9.5 – 63.5mm) OD

  • Type: Tube Cutter

  • Tube Sheet Thickness: 5" - 12" (127.0 - 304.8mm)

  • Non-Ferrous/Steel or Stainless Steel Cutter Blades

Super-Collet-Puller.Search.jpg

Super Collet Tube Puller

Collet Style Hydraulic Tube Puller

Elliott’s collet style tube puller is designed to quickly pull tube stubs from tube sheets without damaging the tube sheet hole. Offering the gripping power of a spear with the speed and convenience of a collet.


  • Tube Size: 0.50″ to 2.50″ (12.7 – 63.5mm)

  • Type: Tube Puller

  • Application: Condensers, chillers, heat exchangers, boiler air heaters, and paper mill evaporators

  • Pulling Capacity: Up to 25 Tons

  • Pulling Stroke: 6.00″ (152.4mm)

One-Rev.Search.jpg

One-Rev Tube Cutters

One-Rev Cutters for Venting Tubes

Elliott’s One-Revolution Series tube cutters are unlike any other one-revolution cutter. Using more advanced engineering principles the cutter and blade have been designed to last longer, withstand more wear, and require less force to cut the tube.


  • Tube Size: 0.375" to 2.500" (9.53 - 63.5mm) OD

  • Reach: 6" & 12" (152.4 & 304.8mm)

  • Type: Tube Cutter

  • Great For Puncturing Or Cutting

 
Boiler-Cutter.Search-1.jpg

Boiler Tube Cutters

Boiler Wheel-Style Tube ID Cutters

Elliott’s 300 Series Boiler Tube cutters are power driven to cut tubes to length in Firetube and Watertube boilers prior to roll beading.


  • Tube Size: 2.000" to 3.000" (50.8 - 76.2mm) OD

  • Type: Tube Cutter

  • Male Square Drive: 1" (25.4mm)

  • Drive Source: Motors with ≤ 150 RPM or Ratchet

  • Use with Elliott Pneumatic Right Angle Roll Motors

Speedcut.Search.jpg

Speed Cut Bundle Cutter

Tube Bundle Cutting Machine

Equipped with a rugged Baldor© Motor and the highly productive Automatic Cutting Force Control, Elliott’s SpeedCut is a quick and cost-effective way to cut through tube bundles and shells in a single pass.


  • Type: Tube Bundle Cutter

  • Tube Bundle Sizes: Up To 98.5" (2.5m) diameter.

  • Automatic Cutting Force Control

  • Unattended Operation

  • Safe and Easy To Use

  • Typical Cutting Time: 20-16 minute

Cyclgrip.Search.jpg

Cycle Grip

Semi-Continuous Tube Puller

 Elliott’s Cyclgrip Semi-Continuous Tube Puller is an engineered product that continuously pulls chiller, heat exchanger, and condenser tubes after the tubes have been pulled free from the tube sheet, making it the ideal companion for the Collet Style Tube Tugger.


  • Tube Size: 0.500” to 1.000” (12.7 – 25.4mm) OD

  • Type: Tube Puller

  • Pulling Speed Per Minute: 10' (3.3m)

 

Tube Expanders

Explore our extensive range of tube installation tools for rolling or "expanding" tubes in to boiler drums, header boxes, heat exchanger tube sheets and chillers.

24-Series (1).png

Condenser Tube Expanders

For Heat Exchanger Tube Rolling

Elliott’s 24 Series Condenser Expanders are ideal for expanding tubes in chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers.


  • Tube Size: 0.500" to 2.000" (12.7 - 50.8mm) OD

  • Roll Type: Straight

  • Application: Chiller, heat exchanger, feedwater heater, fin fan cooler, and surface condenser.

  • Click here for spec sheet

900-Series.png

Flared Boiler Tube Expanders

For Boiler Tube Flare Rolling

Elliott’s 900 Series Flaring Boiler Expanders are self-feeding, specifically made for use in superheaters in watertube boilers or evaporator tubes. In only one operation, these expanders roll tubes parallel and flare projecting tube ends at 15 degrees from the tool center line.


  • Tube Size: 0.620” to 1.500” (15.4 – 38.1mm) OD

  • Roll Type: Flaring

  • Application: Superheaters, watertube boilers, and evaporator tubes.

  • Click here for spec sheet

4480-Series.png

Single Roll Beading Expadners

For Combo Rolling Boiler Tubes

Elliott’s 4480 Series Single Roll Beading Expanders expand the tube into the tube sheet while forming a bead at the end of the tube required in Firetube boiler applications.


  • Tube Size: 2.000” to 3.000” (50.8 – 76.2mm) OD

  • Roll Type: Roll Beading

  • Application: Firetube Boiler

  • Click here for spec sheet

 
40-Series.Search.png

Straight Roll Boiler Expanders

For Rolling Boiler Tubes

Elliott’s 40 Series Straight Boiler Expanders are recommended for re-rolling leaky tube joints in Firetube boilers. Self-feeding, these expanders should primarily be used by hand.


  • Tube Size: 2.000” to 3.000” (50.8 – 76.2mm) OD

  • Roll Type: Straight

  • Application: Firetube Boiler

  • Click here for spec sheet

DRE-Series.Search-1.png

Deep Roll Boiler Expanders

For Boiler Tube Rolling

Elliott’s DRE Series Deep Roll Boiler Expanders are used for deep and hard rolling of steam and mud drums found in high-pressure boilers.


  • Tube Size: 1.750” to 4.000” (44.5 – 101.6mm) OD

  • Roll Type: Straight

  • Application: Steam & Mud Drums and Watertube Boiler

  • Click here for spec sheets

24 series.jpg

Parallel Pin Expanders

For Assisted Tube Rolling Systems

Elliott's PX24 Series offer true parallel pin tube expansion, which can reduce the stress created on welded tube joints when compared to tapered rolling.


  • Tube Size: 0.750″ to 1.000″ (19.05 – 25.4mm) OD

  • Roll Type: Parallel Pin Condenser Expander

  • Application: Chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers.

  • Click here for spec sheets

 

Tube Installation Tools: Rolling Motors

Explore our extensive range of tube installation tools for rolling or "expanding" tubes in to boiler drums, header boxes, heat exchanger tube sheets and chillers.

445-Series- roll Motors.jpg

Right Angle Pneumatic Roll Motors

For Rolling Boiler Tubes

The powerful 445 Series Motors are ideal for tough boiler tube applications. The right angle heads are suitable for rolling tubes in hard to reach, tight areas. Now available in torque controlled & stall type motors.


  • Tube Size: 2.000” to 4.000” (50.8 – 101.6mm) OD

  • Type: Right Angle Pneumatic Rolling Motor

  • Style: Torque Controlled or Stall Type

ET850-Motor.Search.jpg

ET850 Torque Controlled Pneumatic Rolling Motor

For Rolling Boiler & Heat Exchanger Tubes

Elliott's ET850 Motor is the next evolution of push-pull motors. Offering the same USA quality and performance you're used to, with additional features to improve the operator's experience.


  • Tube Size: 0.750” to 1.250” (19.1 – 31.8mm) OD

  • Type: Rolling Motor

  • Power: Pneumatic

  • Torque: Torque Controlled

ET720.Search-1.jpg

ET720 Torque Controlled Pneumatic Rolling Motor

For Rolling Heat Exchanger & Chiller Tubes

The ET Motors are ideal for rolling small tubes commonly found in oil coolers and other small heat exchangers. These motors have undergone extensive testing, proving long tool life and quality.


  • Tube Size: 0.250” to 0.375” (6.35 – 9.525mm) OD

  • Type: Rolling Motor

  • Power: Pneumatic

  • Torque: Torque Controlled

Stall-Torque-Motor.Search.jpg

Stall Torque Pneumatic Rolling Motor

For Rolling Boiler Tubes

Elliott’s Stall Torque Pneumatic Rolling Motors are the most powerful motors available for rolling tubes in extreme applications. The motors are recommended for use in heavy wall, thick drum applications in watertube boilers.


  • Tube Size: 0.750” to 6.000” (19.1 – 152.4mm) OD

  • Type: Rolling Motor

  • Power: Pneumatic

  • Torque: Stall Torque

99-Series-Search.jpg

Electric Rolling Motors

For Rolling Boiler Tubes & Heat Exchanger Tubes

Elliott’s 99 Series electric rolling motors offer better consistency, faster RPMs, and comparable torque to that of pneumatic offerings.


  • Tube Size: 0.250” to 3.000” (6.4 – 76.2mm) OD

  • Type: Rolling Motor

  • Power: Electric 110V or 220V

  • Torque: Torque Controlled with ELC

Assisted-Rolling.Search.jpg

Assisted Roll Systems

For Fast Rolling Heat Exchanger Tubes & Parallel Pin Rolling

Elliott offers 4 different assisted tube rolling systems: Table Hawk, Rapid Hawk Electric, Rapid Hawk Hybrid, and the Monster Hawk. Each system comes equipped with a variety of features to suit a specific industry application.


  • Tube Size: 0.25" to 3.00" (6.35 - 76.2mm) OD

 

Tube Plugging, Cleaning & Testing Tools

Explore our extensive range of tube tools for plugging, venting, cleaning & testing heat exchanger and chiller tubes.

Mechanical-Tube-Plug.Search.png

Torq-N-Seal Tube Plugs

Mechanical High-Pressure Tube Plugs

Elliott’s Torq N’ Seal Mechanical Tube Plugs create a positive mechanical contact seal in excess of 6,500 PSI (448.2 bar), making them ideal for high-pressure applications.


  • Tube Size: 0.410” to 1.000 (10.4 to 25.4mm) ID

  • Maximum Pressure: 6,500 PSI

  • Materials: Brass, Steel, Stainless, Titanium, and more.

  • ASME PCC-2-2015 Compliant

  • Comprehensive Testing and Quality Assurance Standards.

  • Easy To Install- No Hydraulic Equipment Needed.

Two-Piece-Plug.Search.png

Two-Piece Tube Plugs

Two-Piece High Pressure Tube Plugs

Elliott’s Two-Piece Tube Plugs offer more sealing due to the tapered pin design. This gives even expansion to the ring and a long contact to the seal.


  • Tube Size: 0.375” to 1.250 (9.5 - 31.8mm) OD

  • Maximum Pressure: 150 PSI

  • Materials: Brass, Carbon Steel, Stainless Steel, Aluminum, and more.

One-Piece-Plug.Search.png

One-Piece Tube Plugs

One-Piece Tube Plugs

Elliott’s One-Piece Tube Plugs cover a wide tube OD range, making them ideal for sealing leaky tubes in both heat exchangers and boilers.


  • Tube Size: 0.375" to 3.000" (9.5 - 76.2mm) OD

  • Maximum Pressure: 150 PSI

  • Materials: Brass, Carbon Steel, Stainless Steel, Aluminum, Monel, and more.

RECON1250.Search.png

RECON 1250-2500 Tube Testers

For Pressure Testing Tubes for Leaks

 The RECON 1250 and 2500 are simple to operate. Connect the air supply, insert the seals into both sides of the tube ends and pressurize the tubes. Then monitor the gauges for drops in air pressure, which indicate a tube leak.


  • Tube Size: 0.500” to 2.500 (12.7 – 63.5mm) OD

  • Type: Pressure Test Gun

RECON1500.Search.png

RECON 1500 Tube Testers

For Vacuum Testing Tubes for Leaks

Operating the RECON 1500 Tube Leak Test Gun is simple. With the air supply connected, plug one tube end with the test gun and the other end with the T-Handle Plugging Tool. Press the lever trigger and the Venturi System quickly and efficiently evacuates the tube. Then monitor the gauge for loss of vacuum, which indicates a tube leak.


  • Tube Size: 0.280” to 2.456” (7.1 – 62.4mm) ID

  • Type: Vacuum Test Gun

Soot-Buster.Search.jpg

Soot Buster Tube Cleaner

For Cleaning Soot from Firetube Boiler Tubes

The Soot Buster, used for cleaning firetube boiler tubes, is a pneumatically actuated cleaning tool that propels itself inside of tubes and scrubs the tube ID with each pulse.


  • Tube Size: 1-1/4″ to 4″ (31.8 – 101.6mm) OD

  • Tube Section: Straight

  • Deposit Type: Soft (Soot)

  • Thickness: Light & Medium

  • Flush: Dry

5224HeatExchangerCleaner.Search.png

5224XL & 5125 Series Tube Cleaners

For Cleaning Hard Deposits from Heat Exchanger Tubes

The Soot Buster, used for cleaning firetube boiler tubes, is a pneumatically actuated cleaning tool that propels itself inside of tubes and scrubs the tube ID with each pulse.


  • Tube Size: 1-1/4″ to 4″ (31.8 – 101.6mm) OD

  • Tube Section: Straight

  • Deposit Type: Soft (Soot)

  • Thickness: Light & Medium

  • Flush: Dry

Die-Hard.Search.png

DieHard Cableless Tube Cleaner

For Cleaning Hard Deposits from Heat Exchanger, Chiller and Condenser Tubes

Elliott’s Die-Hard™ is the first cableless tube cleaner that successfully cleans light to medium deposits found in chiller, condenser, and heat exchanger tubes.


  • Tube Size: 3/4″ to 1″ (19.1 – 25.4mm) OD

  • Tube Section: Straight

  • Deposit Type: Soft, Gummy, or Organic

  • Thickness: Light to Medium

  • Flush: Wet

Brushes and Pilot Brushes .jpg

Tube Brushes & Tube Pilots

For Cleaning Deposits from Heat Exchanger, Chiller and Condenser Tubes & Guiding in New Heat Exchanger Tubes

Elliott’s Tube Sheet Hole Brushes clean and remove hard deposits from tube sheets and support plate holes in surface condensers and heat exchangers.

Elliott’s Tube Pilots, also known as Tube Guides, are used to pilot replacement tubes through tube sheets and tube support plates that are commonly found in heat exchangers and surface condensers.

  • Tube Size: 0.500” to 1.500” (12.7 – 38.1mm) OD

 

Contact

Contact us 24/7 for rentals, demos, training programs, expert support and emergency tool deliveries.

17351 Hard Hat Dr B14, Covington, LA 70433, USA

(678) 387-7885

  • Google Places
  • Instagram
  • YouTube
  • LinkedIn

Thanks for submitting!