Tube Removal Tools

As the exclusive manufacture-direct representative for Elliott Tube Tools in the Gulf, GSI is proud to present Elliott's extensive line of tried-and-true tube removal tools. Whether you're pulling tubes from a heat exchanger or re-tubing a soot-filled fire-tube boiler, we've got you covered from start to finish with these American-made tools.

Elliott tube removal tools.jpg
 

Tube Removal Tools

Explore our extensive range of tube removal tools for removing tubes from heat exchangers, boilers and chillers.

Elliott Tool Knockout Tools .png

Jumbo Tube Buster

Tube Knockout Hammer and Knockout Tools

Remove stubborn boiler tubes with this rugged knockout hammer and our hardened knockout tool bits. Elliott’s Jumbo Tube Buster is the recommended driving tool for Elliott’s Jumbo Knockout Tools to remove tube stubs in heat exchangers, Firetube boilers, and Watertube boilers.

  • Tube Size: 0.625” to 2.000” (15.9 – 50.8mm) OD

  • Type: Tube Buster

Stub-Tugger.Search-1.jpg

Pine Jenny "Stub Tugger" 

Hydraulic Ram Style Tube Stub Puller

Elliott’s Stub Tugger is a powerful hydraulic tube pulling system for removing tubes from both heat exchangers and boilers.


  • Tube Size: 0.375” to 3.000” (9.5 – 76.2mm) OD

  • Type: Stub Puller

  • Application: Heat exchangers and boilers

  • Pulling Capacity: 30 Ton (27.2Mt)

  • Stroke: 6" (152.4mm)

  • Use with Elliott's long-lasting TT-series tube spears

Elliott Tube Tugger with Spear and Logo .jpg

Tube Tugger 

Semi-Continuous Hydraulic Tube Puller

Elliott’s Tube Tugger is a powerful continuous hydraulic tube pulling system for removing any type of tube material effortlessly from heat exchangers, chillers, and other heat transfer vessels.


  • Tube Size: 0.625” to 1.250” (15.9 – 31.8mm) OD

  • Type: Tube Puller

  • Application: Heat exchangers, chillers, and other heat transfer vessels

  • Pulling Capacity: 30 Ton (27Mt)

  • Stroke: 3" (76.2mm)

  • Use with Elliott's TT Series Tube Spears

 
PTTC-Cutter.Search.jpg

Push-To-Cut Fly Cutters

Tube ID Cutters

Elliott’s PTTC (Push Type Tube Cutter) Series Cutters accommodate heat exchangers and boilers. The adjustable collar allows tubes to be cut or scored just beyond the tube sheet. The cutting blades are specially coated to increase longevity. Use with Elliott's electric or pneumatic drive motors.


  • Tube Size: 0.375” to 2.500” (9.5 – 63.5mm) OD

  • Type: Tube Cutter

  • Tube Sheet Thickness: 5" - 12" (127.0 - 304.8mm)

  • Non-Ferrous/Steel or Stainless Steel Cutter Blades

Super-Collet-Puller.Search.jpg

Super Collet Tube Puller

Collet Style Hydraulic Tube Puller

Elliott’s collet style tube puller is designed to quickly pull tube stubs from tube sheets without damaging the tube sheet hole. Offering the gripping power of a spear with the speed and convenience of a collet.


  • Tube Size: 0.50″ to 2.50″ (12.7 – 63.5mm)

  • Type: Tube Puller

  • Application: Condensers, chillers, heat exchangers, boiler air heaters, and paper mill evaporators

  • Pulling Capacity: Up to 25 Tons

  • Pulling Stroke: 6.00″ (152.4mm)

One-Rev.Search.jpg

One-Rev Tube Cutters

One-Rev Cutters for Venting Tubes

Elliott’s One-Revolution Series tube cutters are unlike any other one-revolution cutter. Using more advanced engineering principles the cutter and blade have been designed to last longer, withstand more wear, and require less force to cut the tube.


  • Tube Size: 0.375" to 2.500" (9.53 - 63.5mm) OD

  • Reach: 6" & 12" (152.4 & 304.8mm)

  • Type: Tube Cutter

  • Great For Puncturing Or Cutting

 
Boiler-Cutter.Search-1.jpg

Boiler Tube Cutters

Boiler Wheel-Style Tube ID Cutters

Elliott’s 300 Series Boiler Tube cutters are power driven to cut tubes to length in Firetube and Watertube boilers prior to roll beading.


  • Tube Size: 2.000" to 3.000" (50.8 - 76.2mm) OD

  • Type: Tube Cutter

  • Male Square Drive: 1" (25.4mm)

  • Drive Source: Motors with ≤ 150 RPM or Ratchet

  • Use with Elliott Pneumatic Right Angle Roll Motors

Speedcut.Search.jpg

Speed Cut Bundle Cutter

Tube Bundle Cutting Machine

Equipped with a rugged Baldor© Motor and the highly productive Automatic Cutting Force Control, Elliott’s SpeedCut is a quick and cost-effective way to cut through tube bundles and shells in a single pass.


  • Type: Tube Bundle Cutter

  • Tube Bundle Sizes: Up To 98.5" (2.5m) diameter.

  • Automatic Cutting Force Control

  • Unattended Operation

  • Safe and Easy To Use

  • Typical Cutting Time: 20-16 minute

Cyclgrip.Search.jpg

Cycle Grip

Semi-Continuous Tube Puller

 Elliott’s Cyclgrip Semi-Continuous Tube Puller is an engineered product that continuously pulls chiller, heat exchanger, and condenser tubes after the tubes have been pulled free from the tube sheet, making it the ideal companion for the Collet Style Tube Tugger.


  • Tube Size: 0.500” to 1.000” (12.7 – 25.4mm) OD

  • Type: Tube Puller

  • Pulling Speed Per Minute: 10' (3.3m)

 

Contact

Contact us 24/7 for rentals, demos, training programs, expert support and emergency tool deliveries.

17351 Hard Hat Dr B14, Covington, LA 70433, USA

(678) 387-7885

  • Google Places
  • Instagram
  • YouTube
  • LinkedIn

Thanks for submitting!